Not a Current Stock Product
Please contact our team for assistance.
Pressure-sensitive adhesives
Latex
Film
3.8 Mil Polyart(R) Matte White / AP151 @ 2.00 Cwt. / 3.2 MIL Laser Liner L-3
Datasheet
Facestock
A 3.8 mil high performance polyethylene base synthetic paper with a unique computer printable top coating allowing Polyart to be printed with flexo, litho, gravure, letterpress and screen methods. It can also be used with thermal transfer, ion dep, dot matrix and certain ink jets.
Type
Film
Tensile MD
6500 Psi
Tensile CD
5000 Psi
Elong MD
200
Elong CD
130
| Properties | Value |
|---|---|
| Caliper | 3.80 Mil |
| Opacity | 92 |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
FSC
No
*Please contact your sales representative for details
Adhesive
An improved general purpose permanent rubber based adhesive which has high initial tack and high ultimate adhesion. It is recommended for high speed wide web processing and can be used on many different substrates. Displays excellent die-cutting & stripping traits.
Type
Permanent
Composition
Latex
Shear
80
Min. Application Temperature
35 F
Min. Service Temperature
-65 F
Max. Application Temperature
220 F
| Properties | Value |
|---|---|
| Glass | 5,7 lbs/linear in. |
| Polyethylene | 6.5 |
Regulatory Approval
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
Direct Food
No
Indirect Food
Yes
*Please contact your sales representative for details
Liner
A bleached kraft liner which has been silicone coated one side to give a controlled release. It is designed to withstand die-cutting and has excellent layflat characteristics while providing outstanding dimensional stability.
Tensile MD
27
Tensile CD
15
Tear MD
37
Tear CD
45
| Description | Value |
|---|---|
| Basis Weight | 44 |
| Caliper | 3,2 |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
*Please contact your sales representative for details
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Address:
Beontag
6206 Wolf Creek Pike
Trotwood, OH 45426
800-358-4448
[email protected]