Not a Current Stock Product
Please contact our team for assistance.
Pressure-sensitive adhesives
Acrylic
Film
4 White Direct Thermal BOPP / Ultra-Removable Adhesive
Datasheet
Facestock
Facestock (4.0 mil White DT BOPP): A white direct thermal top coated, biaxially oriented (BOPP) film that may be used in a wide variety of pressure sensitive label applications. The white polypropylene is treated one side with a print receptive coating for superb ink adhesion, and has great stiffness for efficient dispensability.
Type
Film
Tensile MD
7,000
Tensile CD
19,000 lbs/i
Elong MD
220
Elong CD
38
| Properties | Value |
|---|---|
| Caliper | 4.0 mil |
Regulatory Approval
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
FSC
No
*Please contact your sales representative for details
Adhesive
An ultra-removable emulsion acrylic adhesive with low tack on smooth flat surfaces that can be cleanly removed after extended periods of time. This adhesive is suitable for glass, counter tops, painted metal, smooth painted walls, and stainless steel. This adhesive should be qualified for end-use suitibility.
Type
Removable
Composition
Acrylic
| Properties | Value |
|---|---|
| Glass | 0.3 lbs/linear in. |
| Polyethylene | 6,5lbs/linear in. |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
Indirect Food
Yes
FDA 21 CFR 175.105, BfR XIV
No
*Please contact your sales representative for details
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Address:
Beontag
6206 Wolf Creek Pike
Trotwood, OH 45426
800-358-4448
orders.us@beontag.com