Not a Current Stock Product
Please contact our team for assistance.
Please contact our team for assistance.
Pressure-sensitive adhesives
Acrylic
Paper
This is a high brightness, surface-sized free sheet. Its smoothness and optical properties are designed to yield clean, crisp printed images. Its physical properties provide the dimensional stability and strength required in the pressure sensitive label converting process.
Type
Paper
Tensile MD
30 Lbs/in
Tensile CD
15 Lbs/in
Tear MD
40 Grams
Tear CD
50 Grams
| Properties | Value |
|---|---|
| Basis Weight | 50lbs/3300 sq ft |
| Caliper | 3.50 Mil |
| Opacity | 90 |
| Brightness | 92 |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
FSC
No
*Please contact your sales representative for details
An all temperature and freezer grade acrylic adhesive with good initial tack and high ultimate adhesion when applied at temperatures as low as -20 F. Very good plasticizer, UV and solvent resistance. AT150 adhesive allows for short term reposition on many substrates, yet displays excellent permanency at room temps
Type
Permanent
Composition
Acrylic
Shear
105
Min. Application Temperature
-20 F
Min. Service Temperature
-65 F
Max. Application Temperature
160 F
| Properties | Value |
|---|---|
| Stainless Steel | 5.4 lbs/linear in. |
| Glass | 4.4 lbs/linear in. |
| Polyethylene | 4.2 |
| Corrugated | 1.50 lbs./in. |
| Painted Metal | 5.2 lbs/linear in. |
| Loop Tack | 3.00 oz/in² |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
Direct Food
Yes
Indirect Food
Yes
*Please contact your sales representative for details
Layflat liner which has been silicone coated one side to give a controlled release. It is designed to withstand all die-cutting, marginal punching, perforating, fanfolding and refolding processes. It is an excellent lay-flat liner.
Type
917166
Tensile MD
56 Lbs/In
Tensile CD
24 Lbs/In
Tear MD
74 Grams
Tear CD
81 Grams
| Description | Value |
|---|---|
| Basis Weight | 66 Lbs/Rm |
| Caliper | 4.6 Mil |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
*Please contact your sales representative for details
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Address:
Beontag
6206 Wolf Creek Pike
Trotwood, OH 45426
800-358-4448
[email protected]