Not a Current Stock Product
Please contact our team for assistance.
Please contact our team for assistance.
Pressure-sensitive adhesives
Acrylic
Paper
Type
Paper
Tensile MD
34 Lbs/in
Tensile CD
22 Lbs/in
Tear MD
50 Grams
Tear CD
56 Grams
| Properties | Value |
|---|---|
| Basis Weight | 56lbs/3300 sq ft |
| Caliper | 4.00 Mil |
| Opacity | 89 |
| Brightness | 94 |
Prop65
Yes
FSC
No
*Please contact your sales representative for details
A tri-bonded specialty clear acrylic adhesive featuring high initial tack, high shear & high ultimate adhesion with excellent clarity and minimum cold flow. It has outstanding plasticizer, UV, solvent and occasional water and oil resistance. This is an acid free adhesive.
Type
Permanent
Composition
Acrylic
Shear
110
Min. Application Temperature
35 F
Min. Service Temperature
-65 F
Max. Application Temperature
180 F
| Properties | Value |
|---|---|
| Stainless Steel | 4.7 lbs/linear in. |
| Glass | 2,8lbs/linear in. |
| Polyethylene | 2.9 |
| Corrugated | 1.20 lbs./in. |
| Painted Metal | 4.2 lbs/linear in. |
| Loop Tack | 1.70 oz/in² |
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
Direct Food
No
Indirect Food
Yes
*Please contact your sales representative for details
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
Type
5517153
Tensile MD
43 Lbs/In
Tensile CD
27 Lbs/In
Tear MD
44 Grams
Tear CD
48 Grams
| Description | Value |
|---|---|
| Basis Weight | 52.3 Lbs/Rm |
| Caliper | 3.2 mil |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
*Please contact your sales representative for details
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
Tensile MD
43
Tensile CD
27
Tear MD
44
Tear CD
48
| Description | Value |
|---|---|
| Basis Weight | 50 |
| Caliper | 3,2 |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
*Please contact your sales representative for details
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Address:
Beontag
6206 Wolf Creek Pike
Trotwood, OH 45426
800-358-4448
orders.us@beontag.com