Not a Current Stock Product
Please contact our team for assistance.
Pressure-sensitive adhesives
Rubber
Paper
FSC ScandPrint V / SSF 933 / HG0
Datasheet
Facestock
ScandPrint V is a versatile white calendared woodfree paper, specially selected for use in both simple primary label applications and thermal transfer overprinting.
Type
Paper
Regulatory Approval
FSC
Yes
*Please contact your sales representative for details
Adhesive
SSF933 has excellent initial tack and adhesion on a wide variety of substrates, including apolar, slightly rough and curved substrates. SSF933 is specially designed for use at low temperature and freezer conditions. For applications on cardboard in temperatures warmer than 0 ºC we recommend the SSP 50N or the SSP 713.
Type
Permanent
Composition
Rubber
Min. Application Temperature
-20 F
Min. Service Temperature
-40 F
Max. Application Temperature
50 F
| Properties | Value |
|---|---|
| Stainless Steel | 5,5N |
Regulatory Approval
Food contact
Meets composition requirement of indirect food additives regulation FDA 21-CRF 175.105
*Please contact your sales representative for details
Liner
HG0 honey glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
| Description | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 55 ± 3g/m² |
| Caliper | ISO 534 | 49 ± 3µ |
| Transparency | ISO 2469 | 50% |
*Please contact your sales representative for details
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Address:
Beontag
6206 Wolf Creek Pike
Trotwood, OH 45426
800-358-4448
orders.us@beontag.com