Not a Current Stock Product
Please contact our team for assistance.
Pressure-sensitive adhesives
Rubber
Paper
FSC ScandTherm TCS / SSP 50N x 2
Datasheet
Facestock
ScandTherm TCS is a protected direct chemi-thermal label, which is a woodfree paper with a coating of thermosensitive dyes which turn black when heated. There is a top coating which protects the label surface and thermally printed images from above, against contaminants such as moisture, oil, grease and plasticisers from films. ScandTherm TCS can be printed by water based and UV inks and varnishes designed for use with direct thermal papers. This thermal paper has a standard sensitivity making it suitable for print speeds up to 200-250mm per second depending on printer settings. It is recommended that customers assess both the pre-print and the overprint characteristics under end use conditions before proceeding to long runs.
Type
Paper
Top Coating
Yes
Image color
Black
Printing speed (Max.)
200 mm/s
| Properties | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 75 ± 5g/m² |
| Caliper | ISO 534 | 80 ± 8µ |
Regulatory Approval
FSC
Yes
*Please contact your sales representative for details
Adhesive
ScandStick Permanent 50N has excellent initial tack with high bond strength at elevated, room and chilled temperatures, as well as in moist conditions. It has been formulated to adhere to a wide variety of substrates, including corrugated cardboard, low surface energy materials like polyethylene and non-polar surfaces. SSP 50N provides enhanced conversion characteristics, allowing die-cutting at higher speeds and is designed for both paper and synthetic face materials. Limitation: Not suitable for labelling plasticised PVC.
Type
Permanent
Composition
Rubber
Min. Application Temperature
-5 F
Min. Service Temperature
-40 F
Max. Application Temperature
70 F
Regulatory Approval
Direct Food
Yes
Indirect Food
Yes
Food contact
Meets composition requirement of indirect food additives regulation FDA175.105, BfR XIV.
FDA 21 CFR 175.105, BfR XIV
Yes
ISEGA approved for direct contact with dry and moist non-fatty foods
Yes
*Please contact your sales representative for details
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Address:
Beontag
6206 Wolf Creek Pike
Trotwood, OH 45426
800-358-4448
orders.us@beontag.com