Not a Current Stock Product
Please contact our team for assistance.
Pressure-sensitive adhesives
Rubber
Paper
Techni-Therm Direct NTC ECO / SSP713
Datasheet
Facestock
A non-topcoated direct thermal label facestock designed for short-duration applications in dry environments, free of solvents, grease and oils. Suitable for bar codes, tagging, business and industrial automation, etc. This product contains BPS which is known to the state of California to cause cancer, birth defects, or other reproductive harm (Prop 65).
Type
Paper
| Properties | Value |
|---|---|
| Basis Weight | 47.3# |
| Caliper | 3.1 mil |
Regulatory Approval
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
FSC
No
*Please contact your sales representative for details
Adhesive
SSP713 has excellent initial tack and adhesion on a wide variety of substrates, including apolar, slightly rough and curved substrates. Particularly good adhesion to cardboard, plastic and glass. Note: Not advised for labelling highly plasticised materials, eg: flexible PVC
Type
Permanent
Composition
Rubber
Min. Application Temperature
8 F
Min. Service Temperature
-10 F
Max. Application Temperature
70 F
| Properties | Value |
|---|---|
| Stainless Steel | 18N |
Regulatory Approval
Direct Food
Yes
Indirect Food
Yes
Food contact
Complies with FDA175.105, BfR XIV.
FDA 21 CFR 175.105, BfR XIV
Yes
ISEGA approved for direct contact with dry and moist non-fatty foods
Yes
*Please contact your sales representative for details
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Address:
Beontag
6206 Wolf Creek Pike
Trotwood, OH 45426
800-358-4448
orders.us@beontag.com