Not a Current Stock Product
Please contact our team for assistance.
Please contact our team for assistance.
Pressure-sensitive adhesives
Acrylic
Paper
A medium sensitivity, non-topcoated direct thermal label facestock designed for short-duration applications in dry environments. This paper has an initial activation temperature of 185°F and an effective activation temperature of 280°F. This product contains BPS which is known to the state of California to cause cancer, birth defects, or other reproductive harm (Prop 65).
Type
Paper
Tensile MD
>21
Tensile CD
11.5 lbs.in
| Properties | Value |
|---|---|
| Basis Weight | 47 lbs/rm |
| Caliper | 3.03 mil |
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
FSC
No
*Please contact your sales representative for details
A tri-bonded specialty clear acrylic adhesive featuring high initial tack, high shear & high ultimate adhesion with excellent clarity and minimum cold flow. It has outstanding plasticizer, UV, solvent, and occasional water and oil resistance.
Type
Permanent
Composition
Acrylic
Shear
300
Min. Application Temperature
35 F
Min. Service Temperature
-65 F
Max. Application Temperature
180 F
| Properties | Value |
|---|---|
| Stainless Steel | 5.2 lbs/linear in. |
| Glass | 2,8lbs/linear in. |
| Polyethylene | 1.9 |
| Corrugated | 1.40 lbs./in. |
| Painted Metal | 5.2 lbs/linear in. |
| Loop Tack | 2.20 oz/in² |
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
Direct Food
No
Indirect Food
Yes
*Please contact your sales representative for details
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. Technicote Ultimate silicone release coating provides consistent stripping at high converting speeds through a flat release profile. This paper has a smooth, caliper consistent surface and withstands all conventional processing operations.
Type
718322
Tensile MD
30
Tensile CD
20
Tear MD
32
Tear CD
34
| Description | Value |
|---|---|
| Basis Weight | 40 |
| Caliper | 2.5 |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
*Please contact your sales representative for details
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Address:
Beontag
6206 Wolf Creek Pike
Trotwood, OH 45426
800-358-4448
orders.us@beontag.com