Not a Current Stock Product
Please contact our team for assistance.
Please contact our team for assistance.
Self adhesives
Latex
Film
A matte white reinforced polypropylene film suitable for a wide range of applications where durability, strength, moisture, chemical resistance and superb printability (including thermal transfer) are required. FDA compliant.
Type
Film
Tensile MD
4000 Psi
Tensile CD
2500 Psi
Tear MD
550 Grams
Tear CD
630 Grams
Elong CD
82
| Properties | Value |
|---|---|
| Caliper | 10.00 Mil |
| Opacity | 91 |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
FSC
No
An improved general purpose permanent rubber based adhesive which has high initial tack and high ultimate adhesion. It is recommended for high speed wide web processing and can be used on many different substrates. Displays excellent die-cutting & stripping traits.
Type
Permanent
Composition
Latex
| Properties | Value |
|---|---|
| Typical Peel Adhesion | 5.7 lbs/linear in. |
| Polyethylene | 6.5 |
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
Direct Food
No
Indirect Food
Yes
A paper liner that has been silicone coated one side to give a controlled release. This paper has a hard smooth caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
Type
5517542
Tensile MD
30 Lbs/In
Tensile CD
20 Lbs/In
Tear MD
32 Grams
Tear CD
34 Grams
| Description | Value |
|---|---|
| Basis Weight | 40.5 Lbs/Rm |
| Caliper | 2.5 Mil |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
[email protected]