Not a Current Stock Product
Please contact our team for assistance.
Self adhesives
Rubber
Hot Melt
Paper
10 PT White Uncoated Tag / SSP 754
Datasheet
Facestock
A premium 10 pt. uncoated tag offering excellent stiffness a nd high internal strength.
Type
Paper
Tear MD
205 Grams
Tear CD
200 Grams
| Properties | Value |
|---|---|
| Basis Weight | 133 |
| Caliper | 10.00 Mil |
Regulatory Approval
Prop65
Yes
FSC
No
Adhesive
ScandStick 754 is a high tack adhesive that performs well on a wide range of surfaces, including various boards. 754 gives very good adhesion to low energy surfaces such as polythene, both at room temperature and under chill conditions. Suitable for use with ink-jet, laser and other variable information printable laminates, 754 has excellent resistance to edge bleed to prevent contamination inside printers. It is recommended that products produced with 754 and destined for laser toner fusion work should be wastetrimmed on the edges. Note: Not advised for labelling highly plasticised materials, eg: Flexible PVC.
Type
Permanent
Min. Application Temperature
0ºC
Min. Service Temperature
-15ºC
Max. Service Temperature
75ºC
| Properties | Value |
|---|---|
| Stainless Steel | 17N |
Regulatory Approval
Food contact
Meets composition requirement of indirect food additives regulation FDA 21 CRF 175.105.
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com