Not a Current Stock Product
Please contact our team for assistance.
Please contact our team for assistance.
Self adhesives
Latex
Acrylic
Film
A 1.7 mil clear film with excellent ink receptivity and printability.
Type
Film
Tensile MD
12,500 psi
Tear MD
9 grams
| Properties | Value |
|---|---|
| Caliper | 1.7 mil |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
FSC
No
An outstanding general purpose permanent adhesive which has high initial tack and high ultimate adhesion. It is recommended for high speed wide web processing & can be used on many different substrates. Displays excellent die-cutting & stripping traits.
Type
Permanent
Composition
Latex
Shear
80
Min. Application Temperature
35ºC
Min. Service Temperature
64ºC
Max. Service Temperature
220ºC
| Properties | Value |
|---|---|
| Stainless Steel | 7.5 lbs/linear in. |
| Typical Peel Adhesion | 5,7 lbs/linear in. |
| Polyethylene | 6,5 |
| Corrugated | 2.70 lbs./in. |
| Painted Metal | 7.5 lbs/linear in. |
| Loop Tack | 5.20 oz/in² |
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
Direct Food
No
Indirect Food
Yes
An all temperature and freezer grade acrylic adhesive with good initial tack and high ultimate adhesion when applied at temperatures as low as -20 F. Very good plasticizer, UV and solvent resistance. AT333 adhesive allows for short term reposition on many substrates, yet displays excellent permanency at room temps.
Type
Permanent
Composition
Acrylic
| Properties | Value |
|---|---|
| Typical Peel Adhesion | 1.3 lbs/linear in. |
| Polyethylene | 2.3 |
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
Direct Food
No
Indirect Food
Yes
A 100# tag liner which has been silicone coated one side to give a controlled release. It has exceptionally high internal strength to withstand all conventional processing operations including die-cutting, perforating, fanfolding and refolding processes.
Tensile MD
70
Tensile CD
32
Tear MD
130
Tear CD
160
| Description | Value |
|---|---|
| Basis Weight | 0 |
| Caliper | 8 |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
A clear silicone coated polyester film with extremely high internal strength, excellent dimensional stability, low heat shrinkage, excellent stiffness, high clarity and extreme surface smoothness. It is used widely in pressure sensitive tape and medical applications.
Type
17478
Tensile MD
32000 PSI
| Description | Value |
|---|---|
| Caliper | 2.0 Mil |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
[email protected]