Not a Current Stock Product
Please contact our team for assistance.
Self adhesives
Acrylic
Film
2.3 Mil TC White BOPP / AT150 / 50#SCK L-3
Datasheet
Facestock
A coated one side BOPP face stock with excellent stability and cutting capabilities. This film has excellent stiffness, gloss, and opacity. Excellent whiteness and opacity.
Type
Film
Tensile MD
7
Tensile CD
15
Elong MD
160
Elong CD
30
| Properties | Value |
|---|---|
| Caliper | 2.3 |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
FSC
No
Adhesive
An all temperature and freezer grade acrylic adhesive with good initial tack and high ultimate adhesion when applied at temperatures as low as -20 F. Very good plasticizer, UV and solvent resistance. AT150 adhesive allows for short term reposition on many substrates, yet displays excellent permanency at room temps
Type
Permanent
Shear
105
Min. Application Temperature
-20ºC
Min. Service Temperature
-65ºC
Max. Service Temperature
160ºC
| Properties | Value |
|---|---|
| Stainless Steel | 5.4 lbs/linear in. |
| Typical Peel Adhesion | 4.4 lbs/linear in. |
| Polyethylene | 4.2 |
| Corrugated | 1.50 lbs./in. |
| Painted Metal | 5.2 lbs/linear in. |
| Loop Tack | 3.00 oz/in² |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
Direct Food
Yes
Indirect Food
Yes
Backing
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
Type
5517353
Tensile MD
40
Tensile CD
24
Tear MD
44
Tear CD
48
| Description | Value |
|---|---|
| Basis Weight | 50 |
| Caliper | 3.2 |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com