Not a Current Stock Product
Please contact our team for assistance.
Self adhesives
Acrylic
Film
2.8 mil White TC DT BOPP / GP550 / 42#SCK L-3
Datasheet
Facestock
Facestock (2.8 mil White DT TC BOPP): A white direct thermal top coated, biaxially oriented (BOPP) film that may be used in a wide variety of pressure sensitive label applications. The solid white polypropylene core is treated one side with a print receptive gloss coating for superb ink adhesion, and has great stiffness for efficient dispensability.
Type
Film
Tensile MD
12,000
Tensile CD
27,000 lbs/i
Elong MD
189
Elong CD
40
| Properties | Value |
|---|---|
| Caliper | 2.8 mil |
Regulatory Approval
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
FSC
No
Adhesive
A general purpose permanent acrylic with good initial tack and high ultimate adhesion. This adhesive is available on Thermal Transfer and Direct Thermal NTC paper face stocks, and displays excellent adhesion to most substrates where thermal transfer and non-topcoated direct thermal paper labels are typically utilized.
Type
Permanent
Shear
100
Min. Application Temperature
-20ºC
Min. Service Temperature
-65ºC
Max. Service Temperature
200ºC
| Properties | Value |
|---|---|
| Stainless Steel | 4.8 lbs/linear in. |
| Typical Peel Adhesion | 4.4 lbs/linear in. |
| Polyethylene | 3.9 |
| Corrugated | 1.50 lbs./in. |
| Loop Tack | 2.90 oz/in² |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
Direct Food
No
Indirect Food
Yes
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com