Not a Current Stock Product
Please contact our team for assistance.
Self adhesives
Latex
Paper
38# Techni-Therm / AP151 / 40#SCK L-3
Datasheet
Facestock
A lightweight grade thermal transfer paper that offers a smooth surface for good bar code reproduction. It also offers good smudge resistance and high strength for fast matrix stripping. This lower basis weight will improve yield.
Type
Paper
Tensile CD
17 lb/in
Tear MD
42
| Properties | Value |
|---|---|
| Basis Weight | 38# |
| Caliper | 2.8 |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
FSC
No
Adhesive
An improved general purpose permanent rubber based adhesive which has high initial tack and high ultimate adhesion. It is recommended for high speed wide web processing and can be used on many different substrates. Displays excellent die-cutting & stripping traits.
Type
Permanent
Shear
80
Min. Application Temperature
35ºC
Min. Service Temperature
-65ºC
Max. Service Temperature
220ºC
| Properties | Value |
|---|---|
| Stainless Steel | 7.3 lbs/linear in. |
| Typical Peel Adhesion | 5.7 lbs/linear in. |
| Polyethylene | 6.5 |
| Corrugated | 2.50 lbs./in. |
| Painted Metal | 7.0 lbs/linear in. |
| Loop Tack | 5.00 oz/in² |
Regulatory Approval
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
Direct Food
Yes
Indirect Food
Yes
Backing
A super calendared kraft paper which has been silicone coated one side to give a controlled release. This paper has a hard, smooth caliper for a consistent surface. Due to it's high internal strength, it will withstand all conventional processing operations including: die-cutting, butt cutting, line scoring, and dispersing.
Type
5517342
Tensile MD
30 Lbs/In
Tensile CD
20 Lbs/In
Tear MD
32 Grams
Tear CD
34 Grams
| Description | Value |
|---|---|
| Basis Weight | 40.5 Lbs/Rm |
| Caliper | 2.5 Mil |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com