Not a Current Stock Product
Please contact our team for assistance.
Please contact our team for assistance.
Self adhesives
Acrylic
Film
A 4 mil flexible white vinyl with polymeric plasticizers, formulated to provide optimum performance with pressure sensitive adhesives. The top-coating provides outstanding adhesion to various printing inks.
Type
Film
Tensile MD
3900 lb/in
Tensile CD
3800 lb/in
Tear MD
100 Grams
Tear CD
100 Grams
| Properties | Value |
|---|---|
| Caliper | 4.0 |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
FSC
No
A tri-bonded specialty clear acrylic adhesive featuring high initial tack, high shear & high ultimate adhesion with excellent clarity and minimum cold flow. It has outstanding plasticizer, UV, solvent and occasional water and oil resistance. This is an acid free adhesive.
Type
Permanent
Composition
Acrylic
Shear
350
Min. Application Temperature
35ºC
Min. Service Temperature
-65ºC
Max. Service Temperature
200ºC
| Properties | Value |
|---|---|
| Stainless Steel | 5.6 lbs/linear in. |
| Typical Peel Adhesion | 2,8lbs/linear in. |
| Polyethylene | 2.9 |
| Corrugated | 1.50 lbs./in. |
| Painted Metal | 4.9 lbs/linear in. |
| Loop Tack | 2.70 oz/in² |
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
Direct Food
No
Indirect Food
Yes
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release and coated with anit-block coating on the opposite side. This paper has a hard smooth caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
Type
17242
Tensile MD
43 Lbs/In
Tensile CD
27 Lbs/In
Tear MD
44 Grams
Tear CD
48 Grams
| Description | Value |
|---|---|
| Basis Weight | 50 Lbs/Rm |
| Caliper | 3.2 Mil |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
[email protected]