Not a Current Stock Product
Please contact our team for assistance.
Self adhesives
Latex
Paper
60# Matte Litho / AP151 / 65# C2S L-8
Datasheet
Facestock
A premium matte litho stock with excellent ink receptivity and print characteristics. It also offers good flexibility and high internal strength for ease in converting. This face comes with a brightness of 84% and an opacity of 93%.
Type
Paper
Tear MD
50 Grams
Tear CD
55 Grams
| Properties | Value |
|---|---|
| Basis Weight | 60lbs/3300 sq ft |
| Caliper | 3.90 Mil |
| Opacity | 93 |
| Brightness | 84 |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
FSC
No
Adhesive
An improved general purpose permanent rubber based adhesive which has high initial tack and high ultimate adhesion. It is recommended for high speed wide web processing and can be used on many different substrates. Displays excellent die-cutting & stripping traits.
Type
Permanent
Composition
Latex
Shear
80
Min. Application Temperature
35ºC
Min. Service Temperature
-65ºC
Max. Service Temperature
220ºC
| Properties | Value |
|---|---|
| Stainless Steel | 7.3 lbs/linear in. |
| Typical Peel Adhesion | 5.7 lbs/linear in. |
| Polyethylene | 6.5 |
| Corrugated | 2.50 lbs./in. |
| Painted Metal | 7.0 lbs/linear in. |
| Loop Tack | 5.00 oz/in² |
Regulatory Approval
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
Direct Food
Yes
Indirect Food
Yes
Backing
A standard 65# fully bleached kraft liner that offers high internal strength for die-cutting, perforating and refolding.
Tensile MD
33
Tensile CD
18
Tear MD
51
Tear CD
53
| Description | Value |
|---|---|
| Basis Weight | 0 |
| Caliper | 3,8 |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com