Not a Current Stock Product
Please contact our team for assistance.
Autoadhesivo
Latex
Film
2.3 mil Polar White BOPP / AP151 / 50# L-3 SILICONE LINER WITH ABC COATING
Datos tecnicos
Frontal
A 2.3 mil white BOPP with a 50% gloss level. Outstanding whiteness and opacity. Topcoated for printability using standard print methods and thermal transfer (with resin ribbon only). This film has high machine direction stiffness and tensile strength for superior high speed label dispensing.
Tipo
Film
Tensile MD
20000 Psi
Tensile CD
35000 Psi
Elong MD
180
Elong CD
60
| Propiedades | Valor |
|---|---|
| Espessor | 2.30 Mil |
| Opacidad | 89 |
Aprobación Reglamentaria
RoHS
Si
Prop65
Si
REACH
Si
TPCH
Si
CPSIA
Si
UL
No
FSC
No
Adhesivo
An improved general purpose permanent rubber based adhesive which has high initial tack and high ultimate adhesion. It is recommended for high speed wide web processing and can be used on many different substrates. Displays excellent die-cutting & stripping traits.
Tipo
Permanent
Composición
Latex
Shear
80
| Propiedades | Valor |
|---|---|
| Stainless Steel | 7.3 lbs/linear in. |
| Adhesividad Vidrio | 5.7 lbs/linear in. |
| Polyethylene | 6.5 |
| Corrugated | 2.50 lbs./in. |
| Painted Metal | 7.0 lbs/linear in. |
| Loop Tack | 5.00 oz/in² |
Aprobación Reglamentaria
RoHS
Si
Prop65
No
REACH
Si
TPCH
Si
CPSIA
Si
Contacto directo con los alimentos
Si
Contacto indirecto con los alimentos
Si
Liner
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release and coated with anit-block coating on the opposite side. This paper has a hard smooth caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
Tipo
17242
Tensile MD
43 Lbs/In
Tensile CD
27 Lbs/In
Tear MD
44 Grams
Tear CD
48 Grams
| Descripción | Valor |
|---|---|
| Gramaje | 50 Lbs/Rm |
| Espessor | 3.2 mil |
Aprobación Reglamentaria
RoHS
Si
Prop65
Si
REACH
Si
TPCH
Si
CPSIA
Si
UL
No
Contacto directo con los alimentos
No
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Dirección:
Beontag
Avenida Presidente Kennedy, 2427 - Jardim Lar Parana
Campo Mourão - PR, Brasil
+55 (44) 3518-3500