Not a Current Stock Product
Please contact our team for assistance.
Autoadhesivo
Acrylic
Film
2.3 Mil White BOPP TC / AT150 / 50#SCK L-3
Datos tecnicos
Frontal
A top coated white BOPP face stock with excellent stability and die-cutting capabilities. This film has excellent stiffness, gloss, and opacity. Excellent whiteness and opacity.
Tipo
Film
| Propiedades | Valor |
|---|---|
| Espessor | 2.3 mil |
Aprobación Reglamentaria
RoHS
Si
Prop65
Si
REACH
Si
TPCH
Si
CPSIA
Si
UL
No
FSC
No
Adhesivo
An all temperature and freezer grade acrylic adhesive with good initial tack and high ultimate adhesion when applied at temperatures as low as -20 F. Very good plasticizer, UV and solvent resistance. AT150 adhesive allows for short term reposition on many substrates, yet displays excellent permanency at room temps
Tipo
Permanent
Composición
Acrylic
Shear
105
| Propiedades | Valor |
|---|---|
| Stainless Steel | 5.4 lbs/linear in. |
| Adhesividad Vidrio | 4.4 lbs/linear in. |
| Polyethylene | 4.2 |
| Corrugated | 1.50 lbs./in. |
| Painted Metal | 5.2 lbs/linear in. |
| Loop Tack | 3.00 oz/in² |
Aprobación Reglamentaria
RoHS
Si
Prop65
Si
REACH
Si
TPCH
Si
CPSIA
Si
Contacto directo con los alimentos
Si
Contacto indirecto con los alimentos
Si
Liner
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
Tipo
5517353
Tensile MD
40
Tensile CD
24
Tear MD
44
Tear CD
48
| Descripción | Valor |
|---|---|
| Gramaje | 50 |
| Espessor | 3.2 |
Aprobación Reglamentaria
RoHS
Si
Prop65
Si
REACH
Si
TPCH
Si
CPSIA
Si
UL
No
Contacto directo con los alimentos
No
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Dirección:
Beontag
Avenida Presidente Kennedy, 2427 - Jardim Lar Parana
Campo Mourão - PR, Brasil
+55 (44) 3518-3500