Not a Current Stock Product
Please contact our team for assistance.
Autoadhesivo
Rubber
Film
2.6 Mil Label Lyte / TL250 @ 1.7 Cwt. / 4.5 MIL LAYFLAT L-3
Datos tecnicos
Frontal
A 2.6 mil heat set, biaxially oriented multi-layer white polypropylene film. It is designed for excellent opacity and ha s a high surface treatment for good ink adhesion while maintaining it\'s pearlescent look.
Tipo
Film
Tensile MD
13000 Psi
Tensile CD
25000 Psi
Elong MD
100
Elong CD
50
| Propiedades | Valor |
|---|---|
| Espessor | 2.60 Mil |
| Opacidad | 88 |
Aprobación Reglamentaria
Prop65
Si
FSC
No
Adhesivo
An outstanding general purpose permanent adhesive which has high initial tack and high ultimate adhesion. It is used for tire label and many other difficult to label substrates.
Tipo
Permanent
Composición
Rubber
| Propiedades | Valor |
|---|---|
| Adhesividad Vidrio | 6.7 lbs/linear in. |
| Polyethylene | 7,5 |
Aprobación Reglamentaria
RoHS
Si
Prop65
No
REACH
Si
TPCH
Si
CPSIA
Si
UL
No
Contacto directo con los alimentos
No
Contacto indirecto con los alimentos
Si
Liner
Layflat liner which has been silicone coated one side to give a controlled release. It is designed to withstand all die-cutting, marginal punching, perforating, fanfolding and refolding processes. It is an excellent lay-flat liner.
Tipo
917365
Tensile MD
56 Lbs/In
Tensile CD
24 Lbs/In
Tear MD
74 Grams
Tear CD
81 Grams
| Descripción | Valor |
|---|---|
| Gramaje | 66 Lbs/Rm |
| Espessor | 4.6 Mil |
Aprobación Reglamentaria
RoHS
Si
Prop65
Si
REACH
Si
TPCH
Si
CPSIA
Si
UL
No
Contacto directo con los alimentos
No
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Dirección:
Beontag
Avenida Presidente Kennedy, 2427 - Jardim Lar Parana
Campo Mourão - PR, Brasil
+55 (44) 3518-3500