Not a Current Stock Product
Please contact our team for assistance.
Autoadhesivo
Latex
Film
3.8 Mil Polyart(R) Matte White / AP151 @ 2.00 Cwt. / 3.4 MIL MF LINER L-10
Datos tecnicos
Frontal
A 3.8 mil high performance polyethylene base synthetic paper with a unique computer printable top coating allowing Polyart to be printed with flexo, litho, gravure, letterpress and screen methods. It can also be used with thermal transfer, ion dep, dot matrix and certain ink jets.
Tipo
Film
Tensile MD
6500 Psi
Tensile CD
5000 Psi
Elong MD
200
Elong CD
130
| Propiedades | Valor |
|---|---|
| Espessor | 3.80 Mil |
| Opacidad | 92 |
Aprobación Reglamentaria
RoHS
Si
Prop65
Si
REACH
Si
TPCH
Si
CPSIA
Si
FSC
No
Adhesivo
An improved general purpose permanent rubber based adhesive which has high initial tack and high ultimate adhesion. It is recommended for high speed wide web processing and can be used on many different substrates. Displays excellent die-cutting & stripping traits.
Tipo
Permanent
Composición
Latex
Shear
80
| Propiedades | Valor |
|---|---|
| Adhesividad Vidrio | 5,7 lbs/linear in. |
| Polyethylene | 6.5 |
Aprobación Reglamentaria
RoHS
Si
Prop65
No
REACH
Si
TPCH
Si
CPSIA
Si
Contacto directo con los alimentos
No
Contacto indirecto con los alimentos
Si
Liner
Machine Finished (MF) liner which has been silicone coated one side to give a controlled release. This paper has a hard smooth caliper consistent surface and rough back-side. Due to its relative strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
Tipo
517390
Tensile MD
35 Lbs/Rm
Tensile CD
15 Lbs/In
Tear MD
50 Grams
Tear CD
75 Grams
| Descripción | Valor |
|---|---|
| Gramaje | 50 Lbs/Rm |
| Espessor | 3.4 Mil |
Aprobación Reglamentaria
RoHS
Si
Prop65
Si
REACH
Si
TPCH
Si
CPSIA
Si
UL
No
Contacto directo con los alimentos
No
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Dirección:
Beontag
Avenida Presidente Kennedy, 2427 - Jardim Lar Parana
Campo Mourão - PR, Brasil
+55 (44) 3518-3500