Not a Current Stock Product
Please contact our team for assistance.
Autoadhesivo
Rubber
Paper
FSC ScandTherm TCS / SSP713 / HG0
Datos tecnicos
Frontal
ScandTherm TCS is a protected direct chemi-thermal label, which is a woodfree paper with a coating of thermosensitive dyes which turn black when heated. There is a top coating which protects the label surface and thermally printed images from above, against contaminants such as moisture, oil, grease and plasticisers from films. ScandTherm TCS can be printed by water based and UV inks and varnishes designed for use with direct thermal papers. This thermal paper has a standard sensitivity making it suitable for print speeds up to 200-250mm per second depending on printer settings. It is recommended that customers assess both the pre-print and the overprint characteristics under end use conditions before proceeding to long runs.
Tipo
Paper
Top Coating
Si
Image color
Black
Printing speed (Max.)
200 mm/s
| Propiedades | Método de prueba | Valor |
|---|---|---|
| Gramaje | ISO 536 | 75 ± 5g/m² |
| Espessor | ISO 534 | 80 ± 8µ |
Aprobación Reglamentaria
FSC
Si
Adhesivo
SSP713 has excellent initial tack and adhesion on a wide variety of substrates, including apolar, slightly rough and curved substrates. Particularly good adhesion to cardboard, plastic and glass. Note: Not advised for labelling highly plasticised materials, eg: flexible PVC
Tipo
Permanent
Composición
Rubber
| Propiedades | Valor |
|---|---|
| Stainless Steel | 18N |
Aprobación Reglamentaria
Contacto directo con los alimentos
Si
Contacto indirecto con los alimentos
Si
Contacto con alimentos
Complies with FDA175.105, BfR XIV.
FDA 21 CFR 175.105
Si
ISEGA approved for direct contact with dry and moist non-fatty foods
Si
Liner
HG0 honey glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
| Descripción | Método de prueba | Valor |
|---|---|---|
| Gramaje | ISO 536 | 55 ± 3g/m² |
| Espessor | ISO 534 | 49 ± 3µ |
| Transparency | ISO 2469 | 50% |
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Dirección:
Beontag
Avenida Presidente Kennedy, 2427 - Jardim Lar Parana
Campo Mourão - PR, Brasil
+55 (44) 3518-3500