Not a Current Stock Product
Please contact our team for assistance.
Autoadhesivo
Acrylic
Film
Majestic White 230(TM) PP / TR445A
Datos tecnicos
Frontal
A topcoated white polypropylene film with a gloss level of 48%. Product has excellent printability (Thermal Transfer printability with a resin ribbon only), temperature resistance & semi squeezable performance. This face offers balanced orientation for superior die cutting and high stiffness for conversion and automatic dispensing.
Tipo
Film
Tensile MD
25400 Psi
Tensile CD
22500 Psi
Elong MD
95
Elong CD
115
| Propiedades | Valor |
|---|---|
| Espessor | 2.30 Mil |
| Opacidad | 80 |
Aprobación Reglamentaria
RoHS
Si
Prop65
Si
REACH
Si
TPCH
Si
CPSIA
Si
FSC
No
Adhesivo
A specialty acrylic adhesive showing good to low initial tack with low shear and outstanding removable adhesion with good clarity and minimum cold flow. Excellent removability on a wide range of substrates. Not recommended for curved or textured surfaces.
Tipo
Removable
Composición
Acrylic
Shear
0
| Propiedades | Valor |
|---|---|
| Stainless Steel | 1.7 lbs/linear in. |
| Adhesividad Vidrio | 0 |
| Polyethylene | 0.9 |
| Painted Metal | 1.3 lbs/linear in. |
Aprobación Reglamentaria
RoHS
Si
Prop65
Si
REACH
Si
TPCH
Si
CPSIA
Si
Contacto directo con los alimentos
No
Contacto indirecto con los alimentos
Si
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Dirección:
Beontag
Avenida Presidente Kennedy, 2427 - Jardim Lar Parana
Campo Mourão - PR, Brasil
+55 (44) 3518-3500