Not a Current Stock Product
Please contact our team for assistance.
Autoadhesivo
Rubber
Paper
Techni-Therm Direct WS / TL250 @ 1.7 Cwt. / 40#SCK L-2
Datos tecnicos
Frontal
A top coated direct thermal face with initial activation temperature of 185 F and an effective activation temperature of 280 F. Techni-Therm Direct WS has excellent light stability to resist fading from UV light and superior curl control to insure layflat properties. This product contains BPS which is known to the state of California to cause cancer, birth defects, or other reproductive harm (Prop 65).
Tipo
Paper
Tensile MD
20 Lbs/in
Tensile CD
13 Lbs/in
Tear MD
40 Grams
Tear CD
50 Grams
| Propiedades | Valor |
|---|---|
| Gramaje | 53 # Rm 25 x 38 |
| Espessor | 3.20 Mil |
| Opacidad | 85 |
| Brightness | 89 |
Aprobación Reglamentaria
RoHS
Si
Prop65
No
REACH
Si
TPCH
Si
CPSIA
Si
FSC
No
Adhesivo
An outstanding general purpose permanent adhesive which has high initial tack and high ultimate adhesion. It is used for tire label and many other difficult to label substrates.
Tipo
Permanent
Composición
Rubber
| Propiedades | Valor |
|---|---|
| Adhesividad Vidrio | 6.7 lbs/linear in. |
| Polyethylene | 7,5 |
Aprobación Reglamentaria
RoHS
Si
Prop65
No
REACH
Si
TPCH
Si
CPSIA
Si
UL
No
Contacto directo con los alimentos
No
Contacto indirecto con los alimentos
Si
Liner
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
Tensile MD
34
Tensile CD
22
Tear MD
32
Tear CD
34
| Descripción | Valor |
|---|---|
| Gramaje | 40 |
| Espessor | 2,5 |
Aprobación Reglamentaria
RoHS
Si
Prop65
Si
REACH
Si
TPCH
Si
CPSIA
Si
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Dirección:
Beontag
Avenida Presidente Kennedy, 2427 - Jardim Lar Parana
Campo Mourão - PR, Brasil
+55 (44) 3518-3500