Not a Current Stock Product
Please contact our team for assistance.
Autoadhesivo
Acrylic
Paper
Techni-Therm SP / TS583 @ 2.10 Cwt. / 40#SCK L-3 TU
Datos tecnicos
Frontal
A coated one side thermal transfer facestock with outstanding ink receptivity and print characteristics. It also offers good flexibility and high internal strength for ease in converting. This facestock also offers an 86% brightness and an 87% opacity.
Tipo
Paper
Tensile MD
26 Lbs/in
Tensile CD
18 Lbs/in
Tear MD
42 Grams
Tear CD
42 Grams
| Propiedades | Valor |
|---|---|
| Gramaje | 42 # Rm 24 x 26 |
| Espessor | 2.70 Mil |
| Opacidad | 87 |
| Brightness | 86 |
Aprobación Reglamentaria
RoHS
Si
Prop65
Si
REACH
Si
TPCH
Si
CPSIA
Si
UL
No
FSC
No
Adhesivo
A specialty adhesive designed to adhere to hard to label surfaces with excellent ultimate adhesion when applied at temperatures as low as -20 F. Outstanding permanency at room temperatures. This adhesive has good plasticizer, UV & solvent resistance and high initial tack.
Tipo
Permanent
Composición
Acrylic
Shear
70
| Propiedades | Valor |
|---|---|
| Stainless Steel | 5.9 lbs/linear in. |
| Adhesividad Vidrio | 4,2lbs/linear in. |
| Polyethylene | 6,5lbs/linear in. |
| Corrugated | 1.50 lbs./in. |
| Painted Metal | 5.1 lbs/linear in. |
| Loop Tack | 3.20 oz/in² |
Aprobación Reglamentaria
RoHS
Si
Prop65
No
REACH
Si
TPCH
Si
CPSIA
Si
Contacto directo con los alimentos
No
Contacto indirecto con los alimentos
Si
Liner
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. Technicote Ultimate silicone release coating provides consistent stripping at high converting speeds through a flat release profile. This paper has a smooth, caliper consistent surface and withstands all conventional processing operations.
Tipo
718332
Tensile MD
30 Lbs/in
Tensile CD
20 Lbs/In
Tear MD
32 Grams
Tear CD
34 Grams
| Descripción | Valor |
|---|---|
| Gramaje | 40 Lbs/Rm |
| Espessor | 2.5 Mil |
Aprobación Reglamentaria
RoHS
Si
Prop65
Si
REACH
Si
TPCH
Si
CPSIA
Si
Contacto directo con los alimentos
No
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Dirección:
Beontag
Avenida Presidente Kennedy, 2427 - Jardim Lar Parana
Campo Mourão - PR, Brasil
+55 (44) 3518-3500