Produto não existe
Não existe
Autoadesivo
Rubber
Paper
FSC ScandTherm NTC / SSF 933 / HG0
Dados técnicos
Frontal
Scandtherm NTC is a white, woodfree paper, with black imaging thermosensitive coating designed for short term use in relatively clean and dry environments, where there are no requirements for surface protection against contaminants or scuffing. It can be printed with all commonly used technologies for roll converting, including water and uv-based flexo, uv letterpress etc., if inks and varnishes designed for direct thermal paper is used. We recommend customers to assess both pre-print and thermal print characteristics under end-use conditions before proceeding to long runs.
Tipo
Paper
| Propriedades | Valor |
|---|---|
| Gramatura (g/m²) | 46 lbs/rm |
| Espessura (µ) | 3.0 Mil |
Regulatórios
RoHS
Sim
Prop65
Sim
REACH
Sim
TPCH
Sim
CPSIA
Sim
UL
Não
FSC
Sim
Adesivo
SSF933 has excellent initial tack and adhesion on a wide variety of substrates, including apolar, slightly rough and curved substrates. SSF933 is specially designed for use at low temperature and freezer conditions. For applications on cardboard in temperatures warmer than 0 ºC we recommend the SSP 50N or the SSP 713.
Tipo
Permanent
Composição
Rubber
| Propriedades | Valor |
|---|---|
| Stainless Steel | 5,5N |
Regulatórios
Contato com alimentos
Meets composition requirement of indirect food additives regulation FDA 21-CRF 175.105
Liner
HG0 honey glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
| Propriedades | Método | Valor |
|---|---|---|
| Gramatura (g/m²) | ISO 536 | 55 ± 3g/m² |
| Espessura (µ) | ISO 534 | 49 ± 3µ |
| Transparência | ISO 2469 | 50% |
teste
Endereço:
Beontag
Avenida Presidente Kennedy, 2427 - Jardim Lar Parana
Campo Mourão - PR, Brasil
+55 (44) 3518-3500