Produto não existe
Não existe
Autoadesivo
Paper
FSC ScandTherm NTC / SSP E60
Dados técnicos
Frontal
Scandtherm NTC is a white, woodfree paper, with black imaging thermosensitive coating designed for short term use in relatively clean and dry environments, where there are no requirements for surface protection against contaminants or scuffing. It can be printed with all commonly used technologies for roll converting, including water and uv-based flexo, uv letterpress etc., if inks and varnishes designed for direct thermal paper is used. We recommend customers to assess both pre-print and thermal print characteristics under end-use conditions before proceeding to long runs.
Tipo
Paper
| Propriedades | Valor |
|---|---|
| Gramatura (g/m²) | 46 lbs/rm |
| Espessura (µ) | 3.0 Mil |
Regulatórios
RoHS
Sim
Prop65
Sim
REACH
Sim
TPCH
Sim
CPSIA
Sim
UL
Não
FSC
Sim
Adesivo
ScandStick SSP E60 is a highly versatile permanent adhesive which will adhere to a wide variety of surfaces, both at room temperature and under chill conditions. SSP E60 has been designed to resist edge lift on narrow radius tubes and curved surfaces. SSP E60 has excellent conversion characteristics ensuring consistent waste stripping and label dispensing. It is also suitable for on-press delamination to allow printing on the adhesive surface or tack neutralisation. Although SSP E60 will tolerate some surface condensation, excessive amount of moisture present will reduce the adhesion.
Tipo
Permanent
| Propriedades | Valor |
|---|---|
| Stainless Steel | 13N |
Regulatórios
Contato direto com alimentos
Sim
Contato indireto com alimentos
Sim
Contato com alimentos
Meets composition requirement of indirect food additives regulation FDA175.105, BfR XIV.
FDA 21 CFR 175.105
Sim
ISEGA approved for direct contact with dry and moist non-fatty foods
Sim
teste
Endereço:
Beontag
Avenida Presidente Kennedy, 2427 - Jardim Lar Parana
Campo Mourão - PR, Brasil
+55 (44) 3518-3500