Não existe
Autoadesivo
Rubber
Paper
ScandTherm TCS is a protected direct chemi-thermal label, which is a woodfree paper with a coating of thermosensitive dyes which turn black when heated. There is a top coating which protects the label surface and thermally printed images from above, against contaminants such as moisture, oil, grease and plasticisers from films. ScandTherm TCS can be printed by water based and UV inks and varnishes designed for use with direct thermal papers. This thermal paper has a standard sensitivity making it suitable for print speeds up to 200-250mm per second depending on printer settings. It is recommended that customers assess both the pre-print and the overprint characteristics under end use conditions before proceeding to long runs.
Tipo
Paper
Top Coating
Sim
Image color
Black
Velocidade de impressão (Max.)
200 mm/s
Propriedades | Método | Valor |
---|---|---|
Gramatura (g/m²) | ISO 536 | 75 ± 5g/m² |
Espessura (µ) | ISO 534 | 80 ± 8µ |
FSC
Sim
ScandStick Permanent 50N has excellent initial tack with high bond strength at elevated, room and chilled temperatures, as well as in moist conditions. It has been formulated to adhere to a wide variety of substrates, including corrugated cardboard, low surface energy materials like polyethylene and non-polar surfaces. SSP 50N provides enhanced conversion characteristics, allowing die-cutting at higher speeds and is designed for both paper and synthetic face materials. Limitation: Not suitable for labelling plasticised PVC.
Tipo
Permanent
Composição
Rubber
Contato direto com alimentos
Sim
Contato indireto com alimentos
Sim
Contato com alimentos
Meets composition requirement of indirect food additives regulation FDA175.105, BfR XIV.
FDA 21 CFR 175.105
Sim
ISEGA approved for direct contact with dry and moist non-fatty foods
Sim
teste
Endereço:
Beontag
Avenida Presidente Kennedy, 2427 - Jardim Lar Parana
Campo Mourão - PR, Brasil
+55 (44) 3518-3500