Produto não existe
Não existe
Autoadesivo
Paper
FSC ScandTherm TCS / SSP E60 / HG0
Dados técnicos
Frontal
ScandTherm TCS is a protected direct chemi-thermal label, which is a woodfree paper with a coating of thermosensitive dyes which turn black when heated. There is a top coating which protects the label surface and thermally printed images from above, against contaminants such as moisture, oil, grease and plasticisers from films. ScandTherm TCS can be printed by water based and UV inks and varnishes designed for use with direct thermal papers. This thermal paper has a standard sensitivity making it suitable for print speeds up to 200-250mm per second depending on printer settings. It is recommended that customers assess both the pre-print and the overprint characteristics under end use conditions before proceeding to long runs.
Tipo
Paper
Top Coating
Sim
Image color
Black
Velocidade de impressão (Max.)
200 mm/s
| Propriedades | Método | Valor |
|---|---|---|
| Gramatura (g/m²) | ISO 536 | 75 ± 5g/m² |
| Espessura (µ) | ISO 534 | 80 ± 8µ |
Regulatórios
FSC
Sim
Adesivo
ScandStick SSP E60 is a highly versatile permanent adhesive which will adhere to a wide variety of surfaces, both at room temperature and under chill conditions. SSP E60 has been designed to resist edge lift on narrow radius tubes and curved surfaces. SSP E60 has excellent conversion characteristics ensuring consistent waste stripping and label dispensing. It is also suitable for on-press delamination to allow printing on the adhesive surface or tack neutralisation. Although SSP E60 will tolerate some surface condensation, excessive amount of moisture present will reduce the adhesion.
Tipo
Permanent
| Propriedades | Valor |
|---|---|
| Stainless Steel | 13N |
Regulatórios
Contato direto com alimentos
Sim
Contato indireto com alimentos
Sim
Contato com alimentos
Meets composition requirement of indirect food additives regulation FDA175.105, BfR XIV.
FDA 21 CFR 175.105
Sim
ISEGA approved for direct contact with dry and moist non-fatty foods
Sim
Liner
HG0 honey glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
| Propriedades | Método | Valor |
|---|---|---|
| Gramatura (g/m²) | ISO 536 | 55 ± 3g/m² |
| Espessura (µ) | ISO 534 | 49 ± 3µ |
| Transparência | ISO 2469 | 50% |
teste
Endereço:
Beontag
Avenida Presidente Kennedy, 2427 - Jardim Lar Parana
Campo Mourão - PR, Brasil
+55 (44) 3518-3500