Produto não existe
Não existe
Autoadesivo
Acrylic
Paper
Techni-Therm Direct WS / AT333
Dados técnicos
Frontal
A top coated direct thermal face with initial activation temperature of 185 F and an effective activation temperature of 280 F. Techni-Therm Direct WS has excellent light stability to resist fading from UV light and superior curl control to insure layflat properties. This product contains BPS which is known to the state of California to cause cancer, birth defects, or other reproductive harm (Prop 65).
Tipo
Paper
Tensile MD
20 Lbs/in
Tensile CD
13 Lbs/in
Tear MD
40 Grams
Tear CD
50 Grams
| Propriedades | Valor |
|---|---|
| Gramatura (g/m²) | 53 # Rm 25 x 38 |
| Espessura (µ) | 3.20 Mil |
| Opacidade | 85 |
| Brightness | 89 |
Regulatórios
RoHS
Sim
Prop65
Não
REACH
Sim
TPCH
Sim
CPSIA
Sim
FSC
Não
Adesivo
An all temperature and freezer grade acrylic adhesive with good initial tack and high ultimate adhesion when applied at temperatures as low as -20 F. Very good plasticizer, UV and solvent resistance. AT333 adhesive allows for short term reposition on many substrates, yet displays excellent permanency at room temps.
Tipo
Permanent
Composição
Acrylic
Shear
55
| Propriedades | Valor |
|---|---|
| Stainless Steel | 4.5 lbs/linear in. |
| Glass | 1.3 lbs/linear in. |
| Polyethylene | 2.2 |
| Corrugated | 1.35 lbs./in. |
| Painted Metal | 4.2 lbs/linear in. |
| Loop Tack | 2.15 oz/in² |
Regulatórios
RoHS
Sim
Prop65
Não
REACH
Sim
TPCH
Sim
CPSIA
Sim
Contato direto com alimentos
Não
Contato indireto com alimentos
Sim
teste
Endereço:
Beontag
Avenida Presidente Kennedy, 2427 - Jardim Lar Parana
Campo Mourão - PR, Brasil
+55 (44) 3518-3500