2.3 MIL POLAR WHITE BOPP / AP151 @ 1.3 Cwt. / 3.4 MIL LAYFLAT L-3
Pressure-sensitive adhesives
Hot Melt
Film
2.3 MIL POLAR WHITE BOPP / AP151 @ 1.3 Cwt. / 3.4 MIL LAYFLAT L-3
ITEM #777138
Datasheet
Facestock
A 2.3 mil white BOPP with a 50% gloss level. Outstanding whiteness and opacity. Topcoated for printability using standard print methods and thermal transfer (with resin ribbon only). This film has high machine direction stiffness and tensile strength for superior high speed label dispensing.
Type
Film
Tensile MD
20000 Psi
Tensile CD
35000 Psi
Elong MD
180
Elong CD
60
| Properties | Value |
|---|---|
| Caliper | 2.30 Mil |
| Opacity | 89 |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
FSC
No
*Please contact your sales representative for details
Adhesive
An improved general purpose permanent rubber based adhesive which has high initial tack and high ultimate adhesion. It is recommended for high speed wide web processing and can be used on many different substrates. Displays excellent die-cutting & stripping traits.
Type
Permanent
Composition
Hot Melt
Shear
80
Application Temperature
35 F
Min. Application Temperature
-65 F
Max. Application Temperature
220 F
| Properties | Value |
|---|---|
| Stainless Steel | 7.3 lbs/linear in. |
| Glass | 5.7 |
| Polyethylene | 6.5 |
| Corrugated | 2.50 lbs./in. |
| Painted Metal | 7.0 lbs/linear in. |
| Loop Tack | 5.00 lbs./in. |
Regulatory Approval
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
Indirect Food
Yes
*Please contact your sales representative for details
Liner
A bleached kraft liner which has been silicone coated one side to give a controlled release. It is designed to withstand die-cutting, marginal punching, perforating, fanfolding and refolding process while providing excellent dimensional stability.
Tensile MD
35
Tensile CD
15
Tear MD
50
Tear CD
75
| Description | Value |
|---|---|
| Basis Weight | 0 |
| Caliper | 3,4 |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
*Please contact your sales representative for details
Last update: 05/01/2024
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Address:
Beontag
222 Mound Avenue Miamisburg, OH 45342
800-358-4448
orders.us@beontag.com
Get in touch
Our team of experts is ready to assist you and improve your business.
