Pressure-sensitive adhesives
Hot Melt
Film
2.7 MIL TC LABEL LYTE / TP500 / 50#SCK L-3
ITEM #74352
Datasheet
Facestock
A white, opaque multi-layer cavitated polypropylene film that has been designed for rigid and semi-rigid pressure sensitive applications that require excellent opacity and durability as well as exceptional graphic appeal. Coated two sides for outstanding ink and adhesive anchorage.
Film
13000 Psi
27400 Psi
200
50
| Properties | Value |
|---|---|
| Caliper | 2.70 Mil |
Regulatory Approval
Yes
Yes
Yes
Yes
Yes
No
*Please contact your sales representative for details
Adhesive
A general purpose hotmelt adhesive with high initial tack and excellent ultimate adhesion. This adhesive demonstrates good resistance to water, UV, solvent and plasticizer. TP500 has outstanding adhesion to most plastic substrates, especially HDPE milk jugs.
Hot Melt
Permanent
50
25 F
-65 F
140 F
| Properties | Value |
|---|---|
| Stainless Steel | 6.2 lbs/linear in. |
| Glass | 3.5 |
| Polyethylene | 4.7 |
| Corrugated | 1.50 lbs./in. |
| Painted Metal | 4.0 lbs/linear in. |
| Loop Tack | 3.50 lbs./in. |
Regulatory Approval
Yes
No
Yes
Yes
Yes
No
No
Yes
*Please contact your sales representative for details
Liner
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
5517353
40 Lbs/In
24 Lbs/In
44 Grams
48 Grams
| Description | Value |
|---|---|
| Basis Weight | 50 Lbs/Rm |
| Caliper | 3.2 Mil |
Regulatory Approval
Yes
Yes
Yes
Yes
Yes
No
No
*Please contact your sales representative for details
Last update: 05/01/2024
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Address:
Beontag
222 Mound Avenue Miamisburg, OH 45342
800-358-4448
orders.us@beontag.com
Get in touch
Our team of experts is ready to assist you and improve your business.