4.1 WHITE DIRECT THERMAL BOPP / AT333 HCWT / 40#SCK L-3
Pressure-sensitive adhesives
Acrylic
Film
4.1 WHITE DIRECT THERMAL BOPP / AT333 HCWT / 40#SCK L-3
ITEM #186936
Datasheet
Facestock
A bright white topcoated, synthetic, thermal label facestock with exceptional smoothness. This lightweight product has high durability and exceptional yield, as well as environmental and water resistance.
Film
39 Grams
30 Grams
Properties | Value |
---|---|
Caliper | 4.10 Mil |
Brightness | 90 |
Regulatory Approval
Yes
Yes
Yes
Yes
Yes
No
*Please contact your sales representative for details
Adhesive
An all temperature and freezer grade acrylic adhesive with good initial tack and high ultimate adhesion when applied at temperatures as low as -20 F. Very good plasticizer, UV and solvent resistance. AT333 adhesive allows for short term reposition on many substrates, yet displays excellent permanency at room temps.
Acrylic
Permanent
60
-20 F
-65 F
160 F
Properties | Value |
---|---|
Stainless Steel | 4.9 lbs/linear in. |
Glass | 1.3 |
Polyethylene | 2.2 |
Corrugated | 1.50 lbs./in. |
Painted Metal | 4.7 lbs/linear in. |
Loop Tack | 2.40 lbs./in. |
Regulatory Approval
Yes
No
Yes
Yes
Yes
No
No
Yes
*Please contact your sales representative for details
Liner
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
5517342
34 Lbs/In
22 Lbs/In
32 Grams
34 Grams
Description | Value |
---|---|
Basis Weight | 40 Lbs/Rm |
Caliper | 2.5 Mil |
Regulatory Approval
Yes
Yes
Yes
Yes
Yes
No
No
*Please contact your sales representative for details
Last update: 05/01/2024
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Address:
Beontag
222 Mound Avenue Miamisburg, OH 45342
800-358-4448
orders.us@beontag.com
Get in touch
Our team of experts is ready to assist you and improve your business.