60# CLASSIC CREST SOLAR WHITE WS / TS585WS @ 1.6 Cwt. / 44#PK L-4
Pressure-sensitive adhesives
Acrylic
Paper
60# CLASSIC CREST SOLAR WHITE WS / TS585WS @ 1.6 Cwt. / 44#PK L-4
ITEM #87734
Datasheet
Facestock
60# Fine Textured uncoated paper face sheet with internal wet strength properties. Most commonly used for wine label that is exposed to cold wet conditions.
Type
Paper
Tensile MD
9 Lbs/in
Tensile CD
6 Lbs/in
Tear MD
67 Grams
Tear CD
59 Grams
| Properties | Value |
|---|---|
| Caliper | 4.30 Mil |
| Opacity | 90 |
| Brightness | 91 |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
FSC
No
*Please contact your sales representative for details
Adhesive
A specialty adhesive designed to adhere to slightly wet surfaces with good ultimate adhesion when applied at temperatures as low as -20 F. Excellent permanency at room temperatures. Good plasticizer, UV & solvent resistance. Excellent adhesive for hard to label substrates.
Type
Permanent
Composition
Acrylic
Shear
65
Application Temperature
-20 F
Min. Application Temperature
-65 F
Max. Application Temperature
140 F
| Properties | Value |
|---|---|
| Stainless Steel | 4.8 lbs/linear in. |
| Glass | 3.2 |
| Polyethylene | 2.0 |
| Corrugated | 1.45 lbs./in. |
| Painted Metal | 4.4 lbs/linear in. |
| Loop Tack | 2.70 lbs./in. |
Regulatory Approval
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
Indirect Food
Yes
*Please contact your sales representative for details
Liner
A medium weight natural kraft coated 1 side (C1S) with a gloss polyethylene. Silicone coating has been added on the gloss side (C1S) for a controlled release. It has superb smoothness, excellent dimensional stability and exceptional layflat characteristics.
Type
17745
Tensile MD
35 Lbs/In
Tensile CD
13 Lbs/In
Tear MD
35 Grams
Tear CD
50 Grams
| Description | Value |
|---|---|
| Basis Weight | 44 Lbs/Rm |
| Caliper | 3.2 Mil |
Regulatory Approval
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
*Please contact your sales representative for details
Last update: 05/01/2024
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Address:
Beontag
222 Mound Avenue Miamisburg, OH 45342
800-358-4448
orders.us@beontag.com
Get in touch
Our team of experts is ready to assist you and improve your business.