Pressure-sensitive adhesives
Rubber
Paper
FSC ScandCoat MC PB SSP 50N x 2 HG0 x 2
ITEM #F120000J0P000
Description
ScandCoat MC is a medium gloss machine coated paper with good whiteness. It is a versatile paper which is suitable for a very wide range of primary label work.
Developed for general colour printing, ScandCoat MC gives good colour lift and can be printed by flexography, rotary or flat-bed letterpress, offset lithography, screen process and can be foil blocked and varnished.
It can also be thermal transfer overprinted with suitable smudge resistant ribbons.
This is a PiggyBack construction that has two release coated backing papers, two layers of adhesive and a face material which allows a label to be applied, complete with backing, for future or further application.
The values indicated in this leaflet are not intended to be a specification but a guide to the values that may generally be expected. Customers should independently determine, prior to use, the suitability of any material for a specific purpose. All information is subject to change without notice.
Datasheet
Facestock
ScandCoat MC is a medium gloss machine coated paper with good whiteness. It is a versatile paper which is suitable for a very wide range of primary label work. Developed for general colour printing, ScandCoat MC gives good colour lift and can be printed by flexography, rotary or flat-bed letterpress, offset lithography, screen process and can be foil blocked and varnished. It can also be thermal transfer overprinted with suitable smudge resistant ribbons.
Paper
| Properties | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 78 ± 3g/m² |
| Caliper | ISO 534 | 68 ± 5µ |
| Opacity | ISO 2471 | 89% |
| Brightness | ISO 11475 | 120% |
Regulatory Approval
Yes
*Please contact your sales representative for details
Adhesive
ScandStick Permanent 50N has excellent initial tack with high bond strength at elevated, room and chilled temperatures, as well as in moist conditions. It has been formulated to adhere to a wide variety of substrates, including corrugated cardboard, low surface energy materials like polyethylene and non-polar surfaces. SSP 50N provides enhanced conversion characteristics, allowing die-cutting at higher speeds and is designed for both paper and synthetic face materials. Limitation: Not suitable for labelling plasticised PVC.
Rubber
Permanent
-5 F
-40 F
70 F
Regulatory Approval
Meets composition requirement of indirect food additives regulation FDA175.105, BfR XIV.
Yes
Yes
*Please contact your sales representative for details
Liner
HG0 honey glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
Paper
| Description | Method | Value |
|---|---|---|
| Caliper | ISO 534 | 49 ± 3µ |
| Transparency | ISO 2469 | 50% |
*Please contact your sales representative for details
Final product
Roll
| Description | Value |
|---|---|
| Typical Caliper | 182 ± 20µ |
Regulatory Approval
The product is registered to SCS-COC-004802 FSC ™ Mix credit.
12 months stored at 20ºC/50% RH
*Please contact your sales representative for details
Last update: 05/01/2024
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com
Get in touch
Our team of experts is ready to assist you and improve your business.