Pressure-sensitive adhesives
Hot Melt
Paper
FSC ScandTherm NTC SSP 50N HG0
ITEM #F205000J0N000
Description
Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BgVV XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs.
Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998
Datasheet
Facestock
Scandtherm NTC is a white, woodfree paper, with black imaging thermosensitive coating designed for short term use in relatively clean and dry environments, where there are no requirements for surface protection against contaminants or scuffing. It can be printed with all commonly used technologies for roll converting, including water and uv-based flexo, uv letterpress etc., if inks and varnishes designed for direct thermal paper is used. We recommend customers to assess both pre-print and thermal print characteristics under end-use conditions before proceeding to long runs.
Paper
| Properties | Value |
|---|---|
| Caliper | 3.0 Mil |
Regulatory Approval
Yes
Yes
Yes
Yes
Yes
No
Yes
*Please contact your sales representative for details
Adhesive
General purpose, strong permanent adhesive with good chill characteristics. ScandStick Permanent 50N has excellent initial tack with high bond strength at elevated, room and chilled temperatures, as well as in moist conditions. It has been formulated to adhere to a wide variety of substrates, including corrugated cardboard, low surface energy materials like polyethylene and non-polar surfaces. SSP 50N provides enhanced conversion characteristics, allowing die-cutting at higher speeds and is designed for both paper and synthetic face materials. Limitation: Not suitable for labelling plasticized
Hot Melt
Permanent
Typical Adhesion values
| Properties | Value |
|---|---|
| Glass | 0.0 |
| Polyethylene | 0.0 |
Regulatory Approval
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
*Please contact your sales representative for details
Liner
HG0 honey glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
| Description | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 55 ± 3g/m² |
| Caliper | ISO 534 | 49 ± 3µ |
| Transparency | ISO 2469 | 50% |
*Please contact your sales representative for details
Final product
Roll
| Description | Method | Value |
|---|---|---|
| Typical Caliper | ISO 534 | 132 ± 10% |
Regulatory Approval
12 months stored at 20ºC/50% RH
*Please contact your sales representative for details
Last update: 05/01/2024
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com
Get in touch
Our team of experts is ready to assist you and improve your business.