Pressure-sensitive adhesives
Rubber
Paper
ScandMet S SSP713 HG0
Description
ScandMet S is a bright silver metallised printing paper, that has been coated with a print receptive acrylic lacquer.
The material offers top print quality by all conventional print methods, like flexography, letterpress, offset and screen.
Note that special inks for non-absorbent materials should be used.
The values indicated in this leaflet are not intended to be a specification but a guide to the values that may generally be expected. Customers should independently determine, prior to use, the suitability of any material for a specific purpose. All information is subject to change without notice.
Datasheet
Facestock
ScandMet S is a bright silver metallised printing paper, that has been coated with a print receptive acrylic lacquer. The material offers top print quality by all conventional print methods, like flexography, letterpress, offset and screen. Note that special inks for non-absorbent materials should be used.
Paper
| Properties | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 74 ± 3g/m² |
| Caliper | ISO 534 | 73 ± 5µ |
| Smoothness | ISO 5627 | > 12900s |
Regulatory Approval
No
*Please contact your sales representative for details
Adhesive
SSP713 has excellent initial tack and adhesion on a wide variety of substrates, including apolar, slightly rough and curved substrates. Particularly good adhesion to cardboard, plastic and glass. Note: Not advised for labelling highly plasticised materials, eg: flexible PVC
Rubber
Permanent
8 F
-10 F
70 F
| Properties | Value |
|---|---|
| Stainless Steel | 18N |
Regulatory Approval
Complies with FDA175.105, BfR XIV.
Yes
Yes
*Please contact your sales representative for details
Liner
HG0 honey glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
| Description | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 55 ± 3g/m² |
| Caliper | ISO 534 | 49 ± 3µ |
| Transparency | ISO 2469 | 50% |
*Please contact your sales representative for details
Final product
Roll
| Description | Value |
|---|---|
| Typical Caliper | 142 ± 10µ |
Regulatory Approval
12 months stored at 20ºC/50% RH
*Please contact your sales representative for details
Last update: 05/01/2024
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com
Get in touch
Our team of experts is ready to assist you and improve your business.