TAMPER EVIDENT POLYART TS583 @ 2.5 CWT 40#SCK
Pressure-sensitive adhesives
Acrylic
Film
ITEM #79409
A tamper evident, cavitated, high density polyethylene matte white top coated film with a low internal bond strength that allows the film to delaminate and shred upon removal from a surface. This water and grease resistant film can be printed by dot matrix, thermal transfer, gravure, screen, flexo and letterpress print methods with excellent results.
Type
Film
Tensile MD
5200 Psi
Tensile CD
3915 Psi
Tear MD
200 Grams
Tear CD
275 Grams
Properties | Value |
---|---|
Caliper | 4.10 Mil |
Opacity | 90 |
Brightness | 90 |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
FSC
No
*Please contact your sales representative for details
A specialty adhesive designed to adhere to hard to label surfaces with excellent ultimate adhesion when applied at temperatures as low as -20 F. Outstanding permanency at room temperatures. This adhesive has good plasticizer, UV & solvent resistance and high initial tack.
Type
Permanent
Composition
Acrylic
Shear
70
Min. Application Temperature
-20 F
Min. Service Temperature
-65 F
Max. Application Temperature
160 F
Properties | Value |
---|---|
Stainless Steel | 6.1 lbs/linear in. |
Glass | 4.2 |
Polyethylene | 4.1 |
Corrugated | 1.50 lbs./in. |
Painted Metal | 5.3 lbs/linear in. |
Loop Tack | 3.20 lbs./in. |
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
Indirect Food
Yes
*Please contact your sales representative for details
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
Type
5517342
Tensile MD
34 Lbs/In
Tensile CD
22 Lbs/In
Tear MD
32 Grams
Tear CD
34 Grams
Description | Value |
---|---|
Basis Weight | 40 Lbs/Rm |
Caliper | 2.5 Mil |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
*Please contact your sales representative for details
Last update: 08/19/2024
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products.
Address:
Beontag
6206 Wolf Creek Pike
Trotwood, OH 45426
800-358-4448
orders.us@beontag.com
Our team of experts is ready to assist you and improve your business.