TECHNI-THERM DIRECT II WS / AP151 OPAQUE @ 1.3 Cwt. / 40#SCK L-3
Pressure-sensitive adhesives
Hot Melt
Paper
TECHNI-THERM DIRECT II WS / AP151 OPAQUE @ 1.3 Cwt. / 40#SCK L-3
ITEM #2151998
Datasheet
Facestock
A top coated direct thermal facestock designed for grocery weigh scale label applications where water, oil and heat resistance is essential. This 3.1mil thickness paper also resists plasticizers at room temperature and images best at 8 IPS.
Paper
53 Grams
55 Grams
Properties | Value |
---|---|
Caliper | 3.10 Mil |
Brightness | 77 |
Regulatory Approval
Yes
Yes
Yes
Yes
Yes
No
*Please contact your sales representative for details
Adhesive
An outstanding general purpose permanent opaque adhesive that has high initial tack and high ultimate adhesion. It is recommended for high speed wide web processing and can be used on many different substrates. Displays excellent die-cutting and stripping traits. Provides opacity for cover up applications.
Hot Melt
Permanent
80
35 F
-65 F
220 F
Properties | Value |
---|---|
Stainless Steel | 7.3 lbs/linear in. |
Glass | 5.7 |
Polyethylene | 6.5 |
Corrugated | 2.50 lbs./in. |
Painted Metal | 7.0 lbs/linear in. |
Loop Tack | 5.00 lbs./in. |
Regulatory Approval
Yes
No
Yes
Yes
Yes
No
No
Yes
*Please contact your sales representative for details
Liner
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
5517342
34 Lbs/In
22 Lbs/In
32 Grams
34 Grams
Description | Value |
---|---|
Basis Weight | 40 Lbs/Rm |
Caliper | 2.5 Mil |
Regulatory Approval
Yes
Yes
Yes
Yes
Yes
No
No
*Please contact your sales representative for details
Last update: 05/01/2024
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Address:
Beontag
222 Mound Avenue Miamisburg, OH 45342
800-358-4448
orders.us@beontag.com
Get in touch
Our team of experts is ready to assist you and improve your business.