TECHNI-THERM DIRECT WS / TR440 @ 1.0 Cwt. / 40#SCK L-3
Pressure-sensitive adhesives
Acrylic
Acrylic
Paper
ITEM #889348
A top coated direct thermal face with initial activation temperature of 185 F and an effective activation temperature of 280 F. Techni-Therm Direct WS has excellent light stability to resist fading from UV light and superior curl control to insure layflat properties.
Type
Paper
Tensile MD
20 Lbs/in
Tensile CD
13 Lbs/in
Tear MD
40 Grams
Tear CD
50 Grams
Properties | Value |
---|---|
Basis Weight | 53 # Rm 25 x 38 |
Caliper | 3.20 Mil |
Opacity | 85 |
Brightness | 89 |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
FSC
No
*Please contact your sales representative for details
A specialty clear acrylic adhesive showing good initial removable tack with high shear and high removable adhesion. This adhesive has excellent clarity & minimum cold flow. Good removability on a wide range of substrates including corrugated and many plastic surfaces.
Type
Removable
Composition
Acrylic
Shear
110
Min. Application Temperature
40 F
Min. Service Temperature
-65 F
Max. Application Temperature
150 F
Properties | Value |
---|---|
Stainless Steel | 4.7 lbs/linear in. |
Glass | 3.0 |
Polyethylene | 1.4 |
Corrugated | 1.20 lbs./in. |
Painted Metal | 4.2 lbs/linear in. |
Loop Tack | 1.70 lbs./in. |
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
Indirect Food
Yes
*Please contact your sales representative for details
A tri-bonded specialty clear acrylic adhesive featuring high initial tack, high shear & high ultimate adhesion with excellent clarity and minimum cold flow. It has outstanding plasticizer, UV, solvent and occasional water and oil resistance. This is an acid free adhesive.
Type
Permanent
Composition
Acrylic
Shear
110
Min. Application Temperature
35 F
Min. Service Temperature
-65 F
Max. Application Temperature
180 F
Properties | Value |
---|---|
Stainless Steel | 4.7 lbs/linear in. |
Glass | 2.8 |
Polyethylene | 2.9 |
Corrugated | 1.20 lbs./in. |
Painted Metal | 4.2 lbs/linear in. |
Loop Tack | 1.70 lbs./in. |
RoHS
Yes
Prop65
No
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
Indirect Food
Yes
*Please contact your sales representative for details
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
Type
17142
Tensile MD
34 Lbs/In
Tensile CD
22 Lbs/In
Tear MD
32 Grams
Tear CD
34 Grams
Description | Value |
---|---|
Basis Weight | 40 Lbs/Rm |
Caliper | 2.5 Mil |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
*Please contact your sales representative for details
Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
Type
5517342
Tensile MD
34 Lbs/In
Tensile CD
22 Lbs/In
Tear MD
32 Grams
Tear CD
34 Grams
Description | Value |
---|---|
Basis Weight | 40 Lbs/Rm |
Caliper | 2.5 Mil |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
*Please contact your sales representative for details
Last update: 05/01/2024
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Address:
Beontag
6206 Wolf Creek Pike
Trotwood, OH 45426
800-358-4448
orders.us@beontag.com
Our team of experts is ready to assist you and improve your business.