Self adhesives
Hot Melt
SSP 754
Paper
ScandLaserflex Jet paper is a white uncoated woodfree with a smooth finish suitable for ink-jet and toner printing systems. It has a fresh whiteness to give good colour ink-jet contrast. With its good flexibility, ScandLaserflex is suitable for a wide range of printers and copiers and has been designed to aid performance in machines that have difficult paper paths where there are tight turns and facedown feed systems. Although primarily designed for toner and ink-jet systems, ScandLaserflex can also be printed during label manufacture by traditional pre-print processes. When pre-printing laminate intended for subsequent overprinting, care must be taken to control the laminate moisture and curl. Failure to do so can lead to feed and print problems particularly in laser and copier systems. Care also needs to be taken during storage and conversion. We would advise that self adhesive laminates should be fed from the printer manufacturer's recommended input which, for desktop printers, is usually a multipurpose feed tray.
Type
Paper
| Properties | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 65 g/m² |
| Caliper | ISO 534 | 84µ |
BPA Free
Yes
FSC
Yes
ScandStick 754 is a high tack adhesive that performs well on a wide range of surfaces, including various boards. 754 gives very good adhesion to low energy surfaces such as polythene, both at room temperature and under chill conditions. Suitable for use with ink-jet, laser and other variable information printable laminates, 754 has excellent resistance to edge bleed to prevent contamination inside printers. It is recommended that Products produced with 754 and destined for laser toner fusion work should be wastetrimmed on the edges. Note: Not advised for labelling highly plasticised materials, eg: Flexible PVC.
General purpose permanent - A4 Products
Type
Permanent
Min. Application Temperature
0ºC
Min. Service Temperature
-15ºC
Max. Service Temperature
75ºC
| Properties | Method | Value |
|---|---|---|
| Peel | FTM 1 (20 min) | 17N |
| Tack | FTM 9 | 16N |
Food contact
Meets composition requirement of indirect food additives regulation FDA 21 CRF 175.105.
ISEGA approved for direct contact with dry and moist non-fatty foods
No
ScandSil Kraft 52 (K1) is a light weight kraft backing with good lay-flat properties.
Type
Paper
| Description | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 61 ± 3g/m² |
| Caliper | - | 54 ± 4µ |
| Description | Value |
|---|---|
| Typical Caliper | 147 ± 15µ |
Format
Roll
Certificate
The product is registered to SAI-COC-010567 FSC ™ Mix credit.
Regulations
Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BgVV XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998.
Material Shelf Life
12 months stored at 20ºC/50% RH
SKU
F105001L0N000
Replaces all previous information.
Last update: 11/07/2025
1. All information, recommendations and descriptions of our products are based on research, tests and data believed to be reliable and as such they must be considered as a guide and not as a guarantee nor a warranty. 2. Tests must be conducted by the customer to determine suitability of the products for their purposes and/or ambient, in any application and condition. 3. This document is valid only as information and can be revised without notice. For values and other technical product specifications, contact our Sales or Technical Department.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com
Our team of experts is ready to assist you and improve your business.
