Self adhesives
Hot Melt
SSP 713
Paper
ScandPrint V is a versatile white calendered woodfree paper, specially selected for use in both simple primary - label applications and thermal transfer overprinting. - The surface is suitable for solids, sharp halftones and clear text including small type faces by traditional print - methods. - ScandPrint V may also be used as suitable media for most thermal transfer bar code label printers and print and - apply label applicators, with suitable wax or wax/resin ribbons. - ScandPrint V has both high smoothness to give an even transfer of ink from the ribbon to the paper and suitable - absorbency to allow excellent ink key and smudge resistance.
This is a PiggyBack construction that has two release coated backing papers, two layers of adhesive and a face material which allows a label to be applied, complete with backing, for future or further application.
Type
Paper
| Properties | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 73 ± 3g/m² |
| Caliper | ISO 534 | 72 ± 4µ |
| Opacity | ISO 2471 | 87% |
| Whiteness | ISO 11475 | 147% |
FSC
Yes
SSP713 has excellent initial tack and adhesion on a wide variety of substrates, including apolar, slightly rough and curved substrates. Particularly good adhesion to cardboard, plastic and glass. Note: Not advised for labelling highly plasticised materials, eg: flexible PVC
General purpose permanent
Type
Permanent
Min. Application Temperature
8ºC
Min. Service Temperature
-10ºC
Max. Service Temperature
70ºC
Direct Food
Yes
Indirect Food
Yes
Food contact
Complies with FDA175.105, BfR XIV.
ISEGA approved for direct contact with dry and moist non-fatty foods
Yes
HG0 honey glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
Type
Paper
| Description | Method | Value |
|---|---|---|
| Caliper | ISO 534 | 49 ± 3µ |
| Transparency | ISO 2469 | 50% |
| Description | Value |
|---|---|
| Typical Caliper | 189 ± 20µ |
Format
Roll
Certificate
The product is registered to SAI-COC-010567 FSC ™ Mix credit.
Regulations
Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BgVV XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998.
Material Shelf Life
12 months stored at 20ºC/50% RH
SKU
F100000H0P000
Replaces all previous information.
Last update: 01/05/2024
1. All information, recommendations and descriptions of our Products are based on research, tests and data believed to be reliable and as such they must be considered as a guide and not as a guarantee nor a warranty. 2. Tests must be conducted by the customer to determine suitability of the products for their purposes and/or ambient, in any application and condition. 3. This document is valid only as information and can be revised without notice. For values and other technical product specifications, contact our Sales or Technical Department.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com
Our team of experts is ready to assist you and improve your business.
