Self adhesives
Hot Melt
SSP 90
Paper
ScandCoat MC is a medium gloss machine coated paper with good whiteness. It is a versatile paper which is - suitable for a very wide range of primary label work. - Developed for general colour printing, ScandCoat MC gives good colour lift and can be printed by flexography, - rotary or flat-bed letterpress, offset lithography, screen process and can be foil blocked and varnished. - It can also be thermal transfer overprinted with suitable smudge resistant ribbons.
Type
Paper
| Properties | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 78 ± 3g/m² |
| Caliper | ISO 534 | 68 ± 5µ |
| Opacity | ISO 2471 | 89% |
| Brightness | ISO 11475 | 120% |
| Smoothness | ISO 8791-4 - (PPS 10, WS) | 0,9µ |
SSP 90 is a very aggressive adhesive, specially designed for use on difficult and rough surfaces. Typical use is - tyre labelling. - The increased coat-weight could hava a negative effect on conversion speed and adhesive set-off on diecutting - tools.
Heavy duty speciality permanent
Type
Permanent
Min. Application Temperature
5ºC
Min. Service Temperature
-20ºC
Max. Service Temperature
70ºC
ISEGA approved for direct contact with dry and moist non-fatty foods
No
HG0 honey glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
Type
Paper
| Description | Method | Value |
|---|---|---|
| Caliper | ISO 534 | 49 ± 3µ |
| Transparency | ISO 2469 | 50% |
| Description | Value |
|---|---|
| Typical Caliper | 131 ± 10µ |
Format
Roll
Regulations
Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BgVV XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998.
Material Shelf Life
6 months stored at 20ºC/50% RH
SKU
120000P1N280
Replaces all previous information.
Last update: 01/05/2024
1. All information, recommendations and descriptions of our Products are based on research, tests and data believed to be reliable and as such they must be considered as a guide and not as a guarantee nor a warranty. 2. Tests must be conducted by the customer to determine suitability of the products for their purposes and/or ambient, in any application and condition. 3. This document is valid only as information and can be revised without notice. For values and other technical product specifications, contact our Sales or Technical Department.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com
Our team of experts is ready to assist you and improve your business.
