Self adhesives
Hot Melt
SSP 90
Film
ScandFilm K80 is a super white opaque polypropylene film with a corona treated print surface. - ScandFilm K80 has a fine balance of flexibility and rigidity to suit most general label dispensing and application - requirements. - ScandFilm K80 is also a durable material with a very high tear strength and resistance to moisture and many - chemicals. - ScandFilm K80 is designed for use in pressure sensitive labelling where superior appearance and graphics are - desired. Excellent UV printability. - Conversion is recommended to take place within 6 months of delivery, and always in combination with in-line - corona treatment for optimum performance.
Type
Film
| Properties | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 107 ± 3g/m² |
| Caliper | ISO 534 | 80 ± 3µ |
SSP 90 is a very aggressive adhesive, specially designed for use on difficult and rough surfaces. Typical use is - tyre labelling. - The increased coat-weight could hava a negative effect on conversion speed and adhesive set-off on diecutting - tools.
Heavy duty speciality permanent
Type
Permanent
Min. Application Temperature
5ºC
Min. Service Temperature
-20ºC
Max. Service Temperature
70ºC
ISEGA approved for direct contact with dry and moist non-fatty foods
No
HG0 honey glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
Type
Paper
| Description | Method | Value |
|---|---|---|
| Caliper | ISO 534 | 49 ± 3µ |
| Transparency | ISO 2469 | 50% |
| Description | Value |
|---|---|
| Typical Caliper | 140 ± 10µ |
Format
Roll
Regulations
Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BgVV XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998.
Material Shelf Life
6 months stored at 20ºC/50% RH
SKU
952095P0N200
Replaces all previous information.
Last update: 01/05/2024
1. All information, recommendations and descriptions of our Products are based on research, tests and data believed to be reliable and as such they must be considered as a guide and not as a guarantee nor a warranty. 2. Tests must be conducted by the customer to determine suitability of the products for their purposes and/or ambient, in any application and condition. 3. This document is valid only as information and can be revised without notice. For values and other technical product specifications, contact our Sales or Technical Department.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com
Our team of experts is ready to assist you and improve your business.
