ScandFilm PP50 C TC SSP 50N WG0

Datasheet

Facestock

ScandFilm PP50 C TC is a transparent, biaxially orientated polypropylene film. It is topcoated with a new - versitaile printable coating. - ScandFilm PP50 C TC has a fine balance of flexibility and rigidity to suit most general label dispensing and - application requirements. ScandFilm PP50 C TC is also a durable material with a very high resistance to - moisture and many chemicals. - ScandFilm PP50 C TC is designed for use in pressure sensitive labelling where superior appearance and - graphics are desired. Excellent UV printability. ScandFilm PP50 C TC is not recommended for fan folding

Type

Film

Top Coating

Yes

Properties	Method	Value
Basis Weight	ISO 536	46,9 ± 3g/m²
Caliper	ISO 534	50 ± 3µ
Gloss	ASTM D2457	85%

Adhesive

ScandStick Permanent 50N has excellent initial tack with high bond strength at elevated, room and chilled temperatures, as well as in moist conditions. It has been formulated to adhere to a wide variety of substrates, including corrugated cardboard, low surface energy materials like polyethylene and non-polar surfaces. SSP 50N provides enhanced conversion characteristics, allowing die-cutting at higher speeds and is designed for both paper and synthetic face materials. Limitation: Not suitable for labelling plasticised PVC.

General purpose chill permanent

Type

Permanent

Min. Application Temperature

-5ºC

Min. Service Temperature

-40ºC

Max. Service Temperature

70ºC

Properties	Method	Value
Peel	FTM 1 (20 min)	19N
Tack	FTM 9	18N

Regulatory Approval

Direct Food

Yes

Indirect Food

Yes

Food contact

Meets composition requirement of indirect food additives regulation FDA175.105, BfR XIV.

ISEGA approved for direct contact with dry and moist non-fatty foods

Yes

Backing

WG0 White glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment

Type

Paper

Description	Method	Value
Basis Weight	ISO 536	60 ± 3g/m²
Caliper	ISO 534	53 ± 3µ
Transparency	ISO 2469	49%

Final product

Description	Value
Typical Caliper	111± 11µ

Format

Roll

Regulations

Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BgVV XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998.

Material Shelf Life

12 months stored at 20ºC/50% RH

SKU

713101J0N000

Replaces all previous information.

Last update: 01/05/2024

1. All information, recommendations and descriptions of our Products are based on research, tests and data believed to be reliable and as such they must be considered as a guide and not as a guarantee nor a warranty. 2. Tests must be conducted by the customer to determine suitability of the products for their purposes and/or ambient, in any application and condition. 3. This document is valid only as information and can be revised without notice. For values and other technical product specifications, contact our Sales or Technical Department.

Address:

Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden

+46 42 25 00 50
orders.scandstick@beontag.com