ScandFilm PP50 C TC SSP E60 WG0

Datasheet

Facestock

ScandFilm PP50 C TC is a transparent, biaxially orientated polypropylene film. It is topcoated with a new - versitaile printable coating. - ScandFilm PP50 C TC has a fine balance of flexibility and rigidity to suit most general label dispensing and - application requirements. ScandFilm PP50 C TC is also a durable material with a very high resistance to - moisture and many chemicals. - ScandFilm PP50 C TC is designed for use in pressure sensitive labelling where superior appearance and - graphics are desired. Excellent UV printability. ScandFilm PP50 C TC is not recommended for fan folding

Type

Film

Top Coating

Yes

Properties	Method	Value
Basis Weight	ISO 536	46,9 ± 3g/m²
Caliper	ISO 534	50 ± 3µ
Gloss	ASTM D2457	85%

Adhesive

ScandStick SSP E60 is a highly versatile permanent adhesive which will adhere to a wide variety of surfaces, both at room temperature and under chill conditions. SSP E60 has been designed to resist edge lift on narrow radius tubes and curved surfaces. SSP E60 has excellent conversion characteristics ensuring consistent waste stripping and label dispensing. It is also suitable for on-press delamination to allow printing on the adhesive surface or tack neutralisation. Although SSP E60 will tolerate some surface condensation, excessive amount of moisture present will reduce the adhesion.

General purpose permanent

Type

Permanent

Min. Application Temperature

5ºC

Min. Service Temperature

-20ºC

Max. Service Temperature

100ºC

Properties	Method	Value
Peel	FTM 1 (20 min)	13N
Tack	FTM 9	14N

Regulatory Approval

Direct Food

Yes

Indirect Food

Yes

Food contact

Meets composition requirement of indirect food additives regulation FDA175.105, BfR XIV.

ISEGA approved for direct contact with dry and moist non-fatty foods

Yes

Backing

WG0 White glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment

Type

Paper

Description	Method	Value
Basis Weight	ISO 536	60 ± 3g/m²
Caliper	ISO 534	53 ± 3µ
Transparency	ISO 2469	49%

Final product

Description	Value
Typical Caliper	112 ± 8µ

Format

Roll

Regulations

Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BgVV XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998.

Material Shelf Life

24 months stored at 20ºC/50% RH

SKU

B713101I0N000

Replaces all previous information.

Last update: 01/05/2024

1. All information, recommendations and descriptions of our Products are based on research, tests and data believed to be reliable and as such they must be considered as a guide and not as a guarantee nor a warranty. 2. Tests must be conducted by the customer to determine suitability of the products for their purposes and/or ambient, in any application and condition. 3. This document is valid only as information and can be revised without notice. For values and other technical product specifications, contact our Sales or Technical Department.

Address:

Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden

+46 42 25 00 50
orders.scandstick@beontag.com