Self adhesives

Rubber based hot melt

Paper

ScandMet S SSP713 HG0

Description


ScandMet S is a bright silver metallised printing paper, that has been coated with a print receptive acrylic lacquer.

The material offers top print quality by all conventional print methods, like flexography, letterpress, offset and screen.

Note that special inks for non-absorbent materials should be used.

The values indicated in this leaflet are not intended to be a specification but a guide to the values that may generally be expected. Customers should independently determine, prior to use, the suitability of any material for a specific purpose. All information is subject to change without notice.

Datasheet


Facestock

ScandMet S is a bright silver metallised printing paper, that has been coated with a print receptive acrylic lacquer. The material offers top print quality by all conventional print methods, like flexography, letterpress, offset and screen. Note that special inks for non-absorbent materials should be used.

Type

Paper


PropertiesMethodValue
Basis Weight

ISO 536

74 ± 3g/m²

Caliper

ISO 534

73 ± 5µ

Smoothness

ISO 5627

> 12900s


Regulatory Approval

FSC

No

Adhesive

SSP713 has excellent initial tack and adhesion on a wide variety of substrates, including apolar, slightly rough and curved substrates. Particularly good adhesion to cardboard, plastic and glass. Note: Not advised for labelling highly plasticised materials, eg: flexible PVC

Composition

Rubber based hot melt

Type

Permanent

Application Temperature

8

Min. Application Temperature

-10

Max. Application Temperature

70


Typical Adhesion values

PropertiesValue
Stainless Steel

18N


Regulatory Approval

Food contact

Complies with FDA175.105, BfR XIV.

FDA 21 CFR 175.105, BfR XIV

Yes

ISEGA approved for direct contact with dry and moist non-fatty foods

Yes

Liner

HG0 honey glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.

Type

Paper


DescriptionMethodValue
Basis Weight

ISO 536

55 ± 3g/m²

Caliper

ISO 534

49 ± 3µ

Transparency

ISO 2469

50%

Final product

Format

Roll

Material Shelf Life

12 months stored at 20ºC/50% RH


DescriptionValue
Typical Caliper

142 ± 10µ

Last update: 01/05/2024

Address:

Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
orders.us@beontag.com

Image without alt

Get in touch

Our team of experts is ready to assist you and improve your business.