Self adhesives
Hot Melt
SSF 933
Paper
ScandTherm TCS is a protected direct chemi-thermal label, which is a woodfree paper with a coating of - thermosensitive dyes which turn black when heated. - There is a top coating which protects the label surface and thermally printed images from above, against - contaminants such as moisture, oil, grease and plasticisers from films. - ScandTherm TCS can be printed by water based and UV inks and varnishes designed for use with direct - thermal papers. - This thermal paper has a standard sensitivity making it suitable for print speeds up to 200-250mm per second - depending on printer settings. - It is recommended that customers assess both the pre-print and the overprint characteristics under end use - conditions before proceeding to long runs.
Type
Paper
Top Coating
Yes
Image color
Black
Printing speed (Max.)
200 - 250mm/s
| Properties | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 75 ± 5g/m² |
| Caliper | ISO 534 | 80 ± 8µ |
SSF933 has excellent initial tack and adhesion on a wide variety of substrates, including apolar, slightly rough and curved substrates. SSF933 is specially designed for use at low temperature and freezer conditions. For applications on cardboard in temperatures warmer than 0 ºC we recommend the SSP 50N or the SSP 713.
Deep freeze permanent
Type
Permanent
Min. Application Temperature
-20ºC
Min. Service Temperature
-40ºC
Max. Service Temperature
50ºC
| Properties | Method | Value |
|---|---|---|
| Peel | FTM 1 (20 min) | 5,5N |
| Tack | FTM 9 | 12N |
Food contact
Meets composition requirement of indirect food additives regulation FDA 21-CRF 175.105
ISEGA approved for direct contact with dry and moist non-fatty foods
No
HG0 honey glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
Type
Paper
| Description | Method | Value |
|---|---|---|
| Caliper | ISO 534 | 49 ± 3µ |
| Transparency | ISO 2469 | 50% |
| Description | Value |
|---|---|
| Typical Caliper | 139 ± 14µ |
Format
Roll
Regulations
Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BgVV XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998.
Material Shelf Life
12 months stored at 20ºC/50% RH
SKU
300095K0N000
Replaces all previous information.
Last update: 01/05/2024
1. All information, recommendations and descriptions of our Products are based on research, tests and data believed to be reliable and as such they must be considered as a guide and not as a guarantee nor a warranty. 2. Tests must be conducted by the customer to determine suitability of the products for their purposes and/or ambient, in any application and condition. 3. This document is valid only as information and can be revised without notice. For values and other technical product specifications, contact our Sales or Technical Department.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com
Our team of experts is ready to assist you and improve your business.
